Analysis Results

The results of the analysis of a model are shown in MasterFrame, with the MasterFrame module acting as the central hub for the collection of the various analyses. Results can be displayed in a graphical format for either the full frame or for individual structural elements. The analysis results can also be presented in tabular format. The tabular results can then be printed or exported to Word.

The Finite Element results can be displayed graphically within Masterframe. The FE results can be displayed as a colour coded contour output, but section diagrams are also available.

Units

When viewing the results of a Masterframe analysis, whether graphically or in tabular format, the results are given in the following format:

mm for the nodal displacements, in the Global X and Y directions; and degrees for rotation.

kN for the Axial and Shear Forces;

kNm for the Bending and Torsional Moments;

mm for the Maximum Deflection in the member;

m for the distances along the member measured from node n1;

m for the Nodal co-ordinates;

cm² for the Cross-Sectional Area;

cm⁴ for the Second Moment of Area and the Torsional constant;

kN/mm² for the Modulus of Elasticity;

kN for Total Loads;

kN/m for Load Intensities;

mm for Nodal Settlements in the Global X and Y directions; and

Degrees for Rotational Nodal Movements.